Technical Details
| Standard Dimensions | 1,000 x 500 mm per unit |
| Dimensional tolerances | length/width ±1% Thickness ±2 mm |
| Thickness | 43, 60, 100 mm |
| Weight per m² | approx. 22.5 kg/m² (at 43 mm thickness) approx. 31.5 kg/m² (at 60 mm thickness) approx. 52.0 kg/m² (at 100 mm thickness) |
| Colours | Red Brown, Green, Black |
| Installation | Nailed or screwed into wall studs or wooden slats. |
| Test Result Reaction to Fire | E in line with DIN EN 13501-1 normal combustibility |
Technical Details
|
Standard Dimensions |
1.000 x 500 mm per tile |
|
Dimensional tolerances |
Length/Width ±1% / Thickness ±2 mm |
|
Thickness |
43 mm |
|
Weight per m² |
approx. 35 kg/m² |
|
Colours |
Red Brown, Green, Black |
|
Installation |
Nailed or screwed into wall studs or wooden slats. |
|
Test Result Reaction to Fire |
E in line with DIN EN 13501-1 normal combustibility |
|
Sound Insulation |
Test report by “Institut für Schall- und Wämeschutz” |
INTERLOCKING PAVERS
The compact pavers are easy to interconnect and can easily be combined with common Behaton concrete pavers due to their shape and measurements. Interlocking Pavers are perfectly suitable for all outdoor areas, especially for access paths, shooting ranges, etc. The compact pavers are extremely resilient and durable even under tough conditions, including vehicular traffic. The Interlocking Pavers are available as “starters” and “half pavers”.
Technical Details
|
Standard Dimensions |
200 x 160 mm per unit |
|
Thickness |
43 mm |
|
Weight per m² |
38 kg/m² |
|
Colours |
Red Brown, Green, Black |
|
Installation |
On top of a well compacted and levelled crushed stone base. |
FRAGMENTATION RUBBER
Fragmentation Rubber Sheets serve as the primary bullet impact area and may be built as part of a backstop immediately behind the targets. Fragmentation Rubber Sheets are supplied in rolls and can be cut to almost any required size. They are available in three different thicknesses.
Technical Details
| Width | 1,250 mm per sheet |
| Thickness | 10, 12, 15 mm |
| Colour | Black |
RUBBER FLOORING
Safety Flooring FH possesses the best possible anti-ricochet protection from projectiles up to 7,000 joules. Three layers of polyurethane on top of the tiles provide a hardwearing 2-mm-thick seamless surface. The base layer consists either of elastic tiles made of PUR-bonded rubber fibre material or if required. Its resistance to all kinds of mechanical influences makes this a hard-wearing floor surface that will be around for decades. This surface is available in numerous different colors.
Technical Details
| Standard Dimensions | 1,000 x 500 mm per tile |
| Dimensional Tolerances | length/width ± 1% Thickness ± 2mm |
| Thickness | Black base mat 43 mm, PUR layer 2 mm; other thicknesses on request |
| Weight per m² | approx. 40 kg/m² |
Rolls are available in different thicknesses
| Surface | Seamless sealed |
| Colour Wear Layer | Black base mat, PUR coated surface available in many different colours. Contact with us for other colours. |
| Cleaning | Easy to clean, wet cleaning is also possible |
| Installation | Glued onto levelled, dried screed or mastic asphalt; other bases on request |
Test Result Rebound and Ricochet Behaviour
Projectiles fired from angles of between 10° and 90°: none of the projectiles fired resulted in rebounds or ricochet and therefore presented no danger to the marksmen. The projectiles or projectile fragments were all successfully absorbed by the Safety Flooring. Certified by the German Proof House in Ulm.
Test Result Reaction to Fire
Cfl-s1 in line with DIN EN 13501-1 difficult to ignite. Fulfils the requirements of German National Technical Approval.
Test Result Electrostatic Behaviour
In line with DIN 54346. Certified by TFI (Textile and Flooring Institute GmbH).
SHOOTING BLOCK
Shooting Blocks are perfectly suited for use in bullet traps. They can be applied in various layers or even staggered in any height and depth. Shooting Blocks offer a wide range of application possibilities. Each bullet trap can be designed to suit individual requirements. Alternatively, specially designed constructions based on Elastic Tiles can also be installed.
Technical Details
| Standard Dimensions | 500 x 300 x 200 mm per unit |
| Weight per m² | 25 kg |
| Colour | Red Brown |
Recent Comments