LOAD SECURING
DRIVE SAFE WITH YOUR CARGOS
2 TIMES LESS CARGO CONTROL BELTS
WITH ANTI-SLIP MATS
Neslystanti guma – geriausias produktas, skirtas saugiam krovinių pervežimui keliais, geležinkeliais, oro ir vandens transportu. Per ilgametį naudojimą užsitikrino geriausio ir patikimiausio produkto vardą krovinių pervežimo rinkoje. Neslystančiai guminiai kilimėliai dėl savo savybių, kurios padidina krovinių trintį su paviršiumi, yra naudojami daugelio transporto kompanijų.
| PRODUCT
PHOTO |
 |
 |
 |
| 7210 LS | 9510 RHS | 1000 LSE | |
| MAX. LOADING POSSIBLE THICKNESS |
250 t/m² = 2.50 N/mm² * at 8 mm* thickness 3 mm, 6 mm, 8 mm |
300 t/m² = 3.0 N/mm² * at 8 mm* thickness 3 mm, 6 mm, 8 mm, 12 mm |
630 t/m² = 6.30 N/mm² * at 8 mm* thickness 8 mm, 12 mm, 20 mm |
| COLOUR | black with dark green, light green and yellow particles (legally protected colour code) | multi-coloured | black with red particles |
| WEIGHT kg/m2 | 6.88 kg/m2 | 8.40 kg/m2 | 7.80 kg/m2 |
| TEMPERATURA | from -40 °C till +120 °C | from -40 °C till +120 °C | from -40 °C till +120 °C |
TESTED BY: 
ELONGATION AT BREAK – at least 60% in accordance with DIN EN ISO 1798.
TEMPERATURE RESISTANCE – -40 °C to +120 °C.
DISCARD STATUS – Cracks, holes, crushing, after contact with oil, fuel, chemicals, etc. Anti-Slip Mats are suitable for repeated use through to discard status pursuant to testing by VDZ Dortund.
RESISTANCE – UV light, sodium chloride, weak acids and alkaline solutions (swells up when exposed to hydrocarbons such as oil, fuel, etc.).
CLEANING – Shaking out, vacuuming, washing, possibly treating with a high-pressure cleaner.
DISPOSAL – Considering local regulations, can be deposited with domestic waste as per waste code 070299 according to European Waste Catalogue (EWC).
DELIVERY FORM – rolls, sheets, cuttings on request.
THICKNESSES – 3 – 20 mm.
ANTI-SLIP MAT WEBBING PROTECTORS
Anti-Slip Mat Webbing Protectors – safeguard lashing straps from premature wear and tear caused by sharp edges, and protect breakable loads from damage.
Slip Mat Webbing Protectors – ensure that the lashing strap slides across the load on both edges when being lashed and that the lashing capacity of the belt is evenly distributed. Their underside consists of robust, anti-slip Anti-Slip Mat material, and their upper side of a special fabric layer.
MATERIAL – Robust, friction-enhancing and pressure Slip Mat material with a special fabric on the upper side.
DISPOSAL – Considering legal regulations, can be deposited with residual waste as per waste code 200301 according to European Waste Catalogue (EWC) without difficulty.
ADVANTAGES
– Fast, simple fixing
– No threading of the lash required
– Rear side original Anti-Slip Mats
– Improvement of the transfer coefficient K
– Flexible and optimally adaptable for all lashes
ANTI-SLIP MAT SQUARED TIMBER
Anti-Slip Mat Squared Timbers are friction-increasing surfaces used for securing all kinds of general cargo that cannot be palletized and that are loaded by forklift truck or crane. The squared timbers act as spacers for positioning the forks or crane clamps when loading and unloading. They are fitted with Anti-Slip Mat on the top and bottom longitudinal side to give them a frictionincreasing effect. The Anti-Slip Mat are firmly joined to the timber to prevent any displacement between mat and timber during loading processes. The squared timbers have a narrow right-angled cross-section to prevent them rolling.
APPLICATION – Under precast concrete parts, loose pipes, pipe packages, steel girders, reinforcing steel mesh and other general cargo that cannot be palletized.
MAXIMUM LOADING OF ANTI-SLIP MAT – 250 t/m² = 2.50 N/mm² when 8 mm thick.
MATERIAL – anti-slip mat based on SBR/NBR.
COLOUR – black with green, light green and yellow colour particles. Weight Anti-Slip Mat Squared Timber approx. 10 kg.
TEMPERATURE RESISTANCE OF ANTI-SLIP MAT – -40 °C to +120 °C.
DISCARD STATUS – Cracks, holes, crushing, after contact with oil, fuel, chemicals, etc. Anti-Slip Mats are suitable for repeated use through to discard status pursuant to testing by VDZ Dortmund.
RESISTANCE – UV light, sodium chloride, weak acids and alkaline solutions (swells up when exposed to hydrocarbons such as oil, fuel, etc.).
CLEANING – Vacuuming, washing, possibly treating with a highpressure cleaner.
DISPOSAL – Considering legal regulations, can be deposited with residual waste as per waste code 200301 according to European Waste Catalogue (EWC) without difficulty.
Recent Comments